昨年のハロウィン用につくったＬＥＤ目ん玉を紹介します♪

マジックハンドの先に目の形にLEDテープを貼ったザルをつけてグリップを握るとまばたきします。持ち手もつけてグリグリ回すと瞳がキョロキョロします！

構成

部品

マイコン Arduino Pro Mini 328 5V 16MHz

　
曲げセンサ 55mm

　
フルカラーシリアルLEDテープ Neopixel

　
スライドスイッチ

装置概要

この目ん玉装置はグリップと引き金を有しています。ダイソーのマジックハンドを改造して作りました。

グリップには可変抵抗10kOhmが仕込まれておりグリグリすると目玉の瞳が左右に動きます。
引き金を引くとマジックハンドの手の部分に仕込まれた曲げセンサが曲がって瞬きします。

LED目ん玉

ダイソーのザルにラップをコーティングしてLEDテープNeopixelを目玉型に貼り付けます。

　
Neopixel を68セル使用しています。配線順序は以下の通りです。

動作モード

装置には2つスライドスイッチが仕込まれており、スイッチ状態によって動作モードが以下の表のように変わります。

デモモード：LEDがNeopixelライブラリサンプルコードのように光ります
瞳の色変更モード：瞳の色をグリップで変更
調光モード：LEDの輝度をグリップで変更

Arduino IDEコード

以下のNeopixelライブラリを使用しています。
　https://github.com/adafruit/Adafruit_NeoPixel

#include <Adafruit_NeoPixel.h>
#ifdef __AVR__
  #include <avr/power.h>
#endif

#define PIN 6

Adafruit_NeoPixel led = Adafruit_NeoPixel(68, PIN, NEO_GRB + NEO_KHZ800);

int blackNum = 24;
int pupilNum = 12;

int colorMode1[10] = {7,8,15,18,29,38,49,52,59,60};
int colorMode2[2] = {18,49};
int colorMode3[2] = {7,60};
int colorMode4[2] = {8,59};
int brightMode1[15] = {7,8,9,15,18,26,29,38,39,40,49,52,58,59,60};
int brightMode2[3] = {18,26,49};
int brightMode3[3] = {7,40,60};
int brightMode4[3] = {8,39,59};

//Black eye L&R animation
int blackLED[15][24] = {{12,32,35,55,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        {12,13,31,36,54,55,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        {11,13,14,30,37,53,54,56,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        {10,11,14,15,29,38,52,53,56,57,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        { 9,10,11,12,15,16,28,33,34,39,51,52,55,56,57,58,68,68,68,68,68,68,68,68},
                        { 0, 8, 9,10,11,12,13,16,17,27,32,35,40,50,51,54,55,56,57,58,59,67,68,68},
                        { 0, 1, 7, 8, 9,10,13,14,17,18,26,31,36,41,49,50,53,54,57,58,59,60,66,67},
                        { 1, 2, 6, 7, 8, 9,14,15,18,19,25,30,37,42,48,49,52,53,58,59,60,61,65,66},
                        { 2, 3, 5, 6, 7, 8,15,16,19,20,24,29,38,43,47,48,51,52,59,60,61,62,64,65},
                        { 3, 4, 5, 6, 7,16,17,20,21,23,28,39,44,46,47,50,51,60,61,62,63,64,68,68},
                        { 4, 5, 6,17,18,21,22,27,40,45,46,49,50,61,62,63,68,68,68,68,68,68,68,68},
                        { 4, 5,18,19,26,41,48,49,62,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        { 4,19,20,25,42,47,48,63,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        {20,21,24,43,46,47,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},
                        {21,23,44,46,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68}};

//pupil L&R animation
int pupilLED[15][12] = {{33,34,68,68,68,68,68,68,68,68,68,68},
                        {32,33,34,35,68,68,68,68,68,68,68,68},
                        {12,31,32,33,34,35,36,55,68,68,68,68},
                        {12,13,30,31,32,33,34,35,36,37,54,55},
                        {13,14,29,30,31,32,35,36,37,38,53,54},
                        {14,15,28,29,30,31,36,37,38,39,52,53},
                        {15,16,27,28,29,30,37,38,39,40,51,52},
                        {16,17,26,27,28,29,38,39,40,41,50,51},
                        {17,18,25,26,27,28,39,40,41,42,49,50},
                        {18,19,24,25,26,27,40,41,42,43,48,49},
                        {19,20,23,24,25,26,41,42,43,44,47,48},
                        {20,21,22,23,24,25,42,43,44,45,46,47},
                        {21,22,23,24,43,44,45,46,68,68,68,68},
                        {22,23,44,45,68,68,68,68,68,68,68,68},
                        {22,45,68,68,68,68,68,68,68,68,68,68}};

//Blink animation
int eyelidMode = 0;
int eyelidNum[8] = {0,4,8,16,24,34,44,56};
int eyelidLED[56] = {64,65,66,67,58,59,60,61,56,57,62,63,49,50,51,52,47,48,53,54,38,39,40,41,46,55,36,37,42,43,26,27,28,29,35,44,24,25,30,31,15,16,17,18,34,45,23,32,13,14,19,20,6,7,8,9};

//Bending sensor for Blink
int sensorPin = A5;
int sensorValue = 0;

/*
opration mode
10: demo
00: color adjustment
11: brightness adjustment (0-127)
01: normal
*/
uint32_t color;
int brightness = 40;
int modePin[2] = {11, 12};
int modeVal = 3;

//10kohm volume for adjustment and L&R animation
int pinVR = A4;
int valVR = 1;
int valVRMap = 0;

int waitState = 0;
int demoCnt = 0;


void setup() {
  // This is for Trinket 5V 16MHz, you can remove these three lines if you are not using a Trinket
  #if defined (__AVR_ATtiny85__)
    if (F_CPU == 16000000) clock_prescale_set(clock_div_1);
  #endif
  // End of trinket special code

  Serial.begin(115200);

  pinMode(modePin[0], INPUT_PULLUP);
  pinMode(modePin[1], INPUT_PULLUP);

  led.begin();
  led.setBrightness(brightness); // Initial Brightness 40
  led.show(); // Initialize all pixels to 'off'
  color = led.Color(0, 177, 55); // Initial pupil color
}

void loop() {
  modeVal = modeSel();

  //demo mode
  if (modeVal == 2){
    waitState = 0;
    led.clear();
    led.show();
    
    switch (demoCnt) {
      case 0:
        colorWipe(led.Color(127, 0, 0), 50); // Red
        break;
      case 1:
        colorWipe(led.Color(0, 127, 0), 50); // Green
        break;
      case 2:
        colorWipe(led.Color(0, 0, 127), 50); // Blue
        break;
      case 3:
        theaterChase(led.Color(127, 127, 127), 50); // White
        break;
      case 4:
        theaterChase(led.Color(127, 0, 0), 50); // Red
        break;
      case 5:
        theaterChase(led.Color(0, 0, 127), 50); // Blue
        break;
      case 6:
        rainbow(20);
        break;
      case 7:
        rainbowCycle(20);
        break;
      case 8:
        theaterChaseRainbow(50);
        break;
      case 9:
        demoCnt = 0;
        break;
      }
  }

  //color adjustment mode
  if (modeVal == 0){
    if (waitState == 0) {
      led.clear();
      led.show();
      for(uint16_t i=0; i<10; i++) {
        led.setPixelColor(colorMode1[i], color);
      }
      led.show();
      if (modeSel() != 0){return;}
      delay(800);
      for(uint16_t i=0; i<2; i++) {
        led.setPixelColor(colorMode2[i], 0);
      }
      led.show();
      if (modeSel() != 0){return;}
      delay(400);
      for(uint16_t i=0; i<2; i++) {
        led.setPixelColor(colorMode3[i], 0);
      }
      led.show();
      if (modeSel() != 0){return;}
      delay(400);
      for(uint16_t i=0; i<2; i++) {
        led.setPixelColor(colorMode4[i], 0);
      }
      led.show();
      if (modeSel() != 0){return;}
      delay(400);
      led.clear();
      led.show();
      if (modeSel() != 0){return;}
      delay(400);
      waitState = 1;
    }
    if (modeSel() != 0){return;}
    valVR = analogRead(pinVR);
    valVRMap = map(valVR, 0, 512, 0, 255);
    if (valVRMap > 255) {
      valVRMap = 255;
    }
    if (valVRMap < 0) {
      valVRMap = 0;
    }
    
    color = Wheel(valVRMap);
    blink(0, 7);
  }

  //brightness adjustment mode
  if (modeVal == 3){
    if (waitState == 0) {
      led.clear();
      led.show();
      for(uint16_t i=0; i<15; i++) {
        led.setPixelColor(brightMode1[i], color);
      }
      led.show();
      if (modeSel() != 3){return;}
      delay(800);
      for(uint16_t i=0; i<3; i++) {
        led.setPixelColor(brightMode2[i], 0);
      }
      led.show();
      if (modeSel() != 3){return;}
      delay(400);
      for(uint16_t i=0; i<3; i++) {
        led.setPixelColor(brightMode3[i], 0);
      }
      led.show();
      if (modeSel() != 3){return;}
      delay(400);
      for(uint16_t i=0; i<3; i++) {
        led.setPixelColor(brightMode4[i], 0);
      }
      led.show();
      if (modeSel() != 3){return;}
      delay(400);
      led.clear();
      led.show();
      if (modeSel() != 3){return;}
      delay(400);
      waitState = 1;
    }
    if (modeSel() != 3){return;}
    valVR = analogRead(pinVR);
    valVRMap = map(valVR, 0, 512, 3, 70);
    if (valVRMap > 70) {
      valVRMap = 70;
    }
    if (valVRMap < 0) {
      valVRMap = 0;
    }
    
    Serial.print(valVR);
    Serial.print("\t");
    Serial.println(valVRMap);
    
    brightness = valVRMap;
    led.setBrightness(brightness);
    blink(0, 7);
  }

  //normal mode
  if (modeVal == 1) {
    waitState = 0;

    sensorValue = analogRead(sensorPin);
    eyelidMode = map(sensorValue, 770, 815, 0, 8);
    if (eyelidMode > 8) {
      eyelidMode = 8;
    }
    if (eyelidMode < 0) {
      eyelidMode = 0;
    }

    valVR = analogRead(pinVR);
    valVRMap = map(valVR, 314, 456, 14, 0);
    if (valVRMap > 14) {
      valVRMap = 14;
    }
    if (valVRMap < 0) {
      valVRMap = 0;
    }
    
    blink(eyelidMode, valVRMap);
  }
}

byte modeSel(){
  int i,j=0;
  //Get the mode switches state
  for (i=0; i<2; i++) {
    j = (j << 1) | digitalRead(modePin[i]);   // read each input pin
  }
  return j; //return address
}

void blink(int eyelid, int LR) {
  if (eyelid != 8){
    //Pewter
    for(uint16_t i=0; i<led.numPixels(); i++) {
      led.setPixelColor(i, led.Color(66, 66, 66));
    }
    
    //Black eye
    for(uint16_t i=0; i<blackNum; i++) {
      led.setPixelColor(blackLED[LR][i], color);
    }
    
    //pupil
    for(uint16_t i=0; i<pupilNum; i++) {
      led.setPixelColor(pupilLED[LR][i], led.Color(0, 0, 66));
    }

    //eyelid
    for(int i=0; i < eyelidNum[eyelid]; i++) {
      led.setPixelColor(eyelidLED[i], 0);
    }
  } else if (eyelid == 8){
    led.clear();
  }
  led.show();
}

// Fill the dots one after the other with a color
void colorWipe(uint32_t c, uint8_t wait) {
  for(uint16_t i=0; i < led.numPixels(); i++) {
    led.setPixelColor(i, c);
    if (modeSel() != 2){return;}
    led.show();
    delay(wait);
  }
  demoCnt++;
}

//Theatre-style crawling lights.
void theaterChase(uint32_t c, uint8_t wait) {
  for (int j=0; j<10; j++) {  //do 10 cycles of chasing
    for (int q=0; q < 3; q++) {
      for (int i=0; i < led.numPixels(); i=i+3) {
        led.setPixelColor(i+q, c);    //turn every third pixel on
        if (modeSel() != 2){return;}
      }
      led.show();
      delay(wait);
      
      for (int i=0; i < led.numPixels(); i=i+3) {
        led.setPixelColor(i+q, 0);        //turn every third pixel off
      }
    }
  }
  demoCnt++;
}

void rainbow(uint8_t wait) {
  uint16_t i, j;

  for(j=0; j<256; j++) {
    for(i=0; i<led.numPixels(); i++) {
      led.setPixelColor(i, Wheel((i+j) & 255));
      if (modeSel() != 2){return;}
    }
    led.show();
    delay(wait);
  }
  demoCnt++;
}

// Slightly different, this makes the rainbow equally distributed throughout
void rainbowCycle(uint8_t wait) {
  uint16_t i, j;

  for(j=0; j<256*5; j++) { // 5 cycles of all colors on wheel
    for(i=0; i< led.numPixels(); i++) {
      led.setPixelColor(i, Wheel(((i * 256 / led.numPixels()) + j) & 255));
      if (modeSel() != 2){return;}
    }
    led.show();
    delay(wait);
  }
  demoCnt++;
}

//Theatre-style crawling lights with rainbow effect
void theaterChaseRainbow(uint8_t wait) {
  for (int j=0; j < 256; j++) {     // cycle all 256 colors in the wheel
    for (int q=0; q < 3; q++) {
      for (int i=0; i < led.numPixels(); i=i+3) {
        led.setPixelColor(i+q, Wheel( (i+j) % 255));    //turn every third pixel on
        if (modeSel() != 2){return;}
      }
      led.show();
      delay(wait);

      for (int i=0; i < led.numPixels(); i=i+3) {
        led.setPixelColor(i+q, 0);        //turn every third pixel off
      }
    }
  }
  demoCnt++;
}

// Input a value 0 to 255 to get a color value.
// The colours are a transition r - g - b - back to r.
uint32_t Wheel(byte WheelPos) {
  WheelPos = 255 - WheelPos;
  if(WheelPos < 85) {
    return led.Color(255 - WheelPos * 3, 0, WheelPos * 3);
  }
  if(WheelPos < 170) {
    WheelPos -= 85;
    return led.Color(0, WheelPos * 3, 255 - WheelPos * 3);
  }
  WheelPos -= 170;
  return led.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

#include <Adafruit_NeoPixel.h>

#ifdef __AVR__

#include <avr/power.h>

#endif

#define PIN 6

Adafruit_NeoPixel led = Adafruit_NeoPixel(68, PIN, NEO_GRB + NEO_KHZ800);

int blackNum = 24;

int pupilNum = 12;

int colorMode1[10] = {7,8,15,18,29,38,49,52,59,60};

int colorMode2[2] = {18,49};

int colorMode3[2] = {7,60};

int colorMode4[2] = {8,59};

int brightMode1[15] = {7,8,9,15,18,26,29,38,39,40,49,52,58,59,60};

int brightMode2[3] = {18,26,49};

int brightMode3[3] = {7,40,60};

int brightMode4[3] = {8,39,59};

//Black eye L&R animation

int blackLED[15][24] = {{12,32,35,55,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{12,13,31,36,54,55,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{11,13,14,30,37,53,54,56,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{10,11,14,15,29,38,52,53,56,57,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{ 9,10,11,12,15,16,28,33,34,39,51,52,55,56,57,58,68,68,68,68,68,68,68,68},

{ 0, 8, 9,10,11,12,13,16,17,27,32,35,40,50,51,54,55,56,57,58,59,67,68,68},

{ 0, 1, 7, 8, 9,10,13,14,17,18,26,31,36,41,49,50,53,54,57,58,59,60,66,67},

{ 1, 2, 6, 7, 8, 9,14,15,18,19,25,30,37,42,48,49,52,53,58,59,60,61,65,66},

{ 2, 3, 5, 6, 7, 8,15,16,19,20,24,29,38,43,47,48,51,52,59,60,61,62,64,65},

{ 3, 4, 5, 6, 7,16,17,20,21,23,28,39,44,46,47,50,51,60,61,62,63,64,68,68},

{ 4, 5, 6,17,18,21,22,27,40,45,46,49,50,61,62,63,68,68,68,68,68,68,68,68},

{ 4, 5,18,19,26,41,48,49,62,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{ 4,19,20,25,42,47,48,63,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{20,21,24,43,46,47,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68},

{21,23,44,46,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68,68}};

//pupil L&R animation

int pupilLED[15][12] = {{33,34,68,68,68,68,68,68,68,68,68,68},

{32,33,34,35,68,68,68,68,68,68,68,68},

{12,31,32,33,34,35,36,55,68,68,68,68},

{12,13,30,31,32,33,34,35,36,37,54,55},

{13,14,29,30,31,32,35,36,37,38,53,54},

{14,15,28,29,30,31,36,37,38,39,52,53},

{15,16,27,28,29,30,37,38,39,40,51,52},

{16,17,26,27,28,29,38,39,40,41,50,51},

{17,18,25,26,27,28,39,40,41,42,49,50},

{18,19,24,25,26,27,40,41,42,43,48,49},

{19,20,23,24,25,26,41,42,43,44,47,48},

{20,21,22,23,24,25,42,43,44,45,46,47},

{21,22,23,24,43,44,45,46,68,68,68,68},

{22,23,44,45,68,68,68,68,68,68,68,68},

{22,45,68,68,68,68,68,68,68,68,68,68}};

//Blink animation

int eyelidMode = 0;

int eyelidNum[8] = {0,4,8,16,24,34,44,56};

int eyelidLED[56] = {64,65,66,67,58,59,60,61,56,57,62,63,49,50,51,52,47,48,53,54,38,39,40,41,46,55,36,37,42,43,26,27,28,29,35,44,24,25,30,31,15,16,17,18,34,45,23,32,13,14,19,20,6,7,8,9};

//Bending sensor for Blink

int sensorPin = A5;

int sensorValue = 0;

opration mode

10: demo

00: color adjustment

11: brightness adjustment (0-127)

01: normal

uint32_t color;

int brightness = 40;

int modePin[2] = {11, 12};

int modeVal = 3;

//10kohm volume for adjustment and L&R animation

int pinVR = A4;

int valVR = 1;

int valVRMap = 0;

int waitState = 0;

int demoCnt = 0;

void setup() {

// This is for Trinket 5V 16MHz, you can remove these three lines if you are not using a Trinket

#if defined (__AVR_ATtiny85__)

if (F_CPU == 16000000) clock_prescale_set(clock_div_1);

#endif

// End of trinket special code

Serial.begin(115200);

pinMode(modePin[0], INPUT_PULLUP);

pinMode(modePin[1], INPUT_PULLUP);

led.begin();

led.setBrightness(brightness); // Initial Brightness 40

led.show(); // Initialize all pixels to 'off'

color = led.Color(0, 177, 55); // Initial pupil color

}

void loop() {

modeVal = modeSel();

//demo mode

if (modeVal == 2){

waitState = 0;

led.clear();

led.show();

switch (demoCnt) {

case 0:

colorWipe(led.Color(127, 0, 0), 50); // Red

break;

case 1:

colorWipe(led.Color(0, 127, 0), 50); // Green

break;

case 2:

colorWipe(led.Color(0, 0, 127), 50); // Blue

break;

case 3:

theaterChase(led.Color(127, 127, 127), 50); // White

break;

case 4:

theaterChase(led.Color(127, 0, 0), 50); // Red

break;

case 5:

theaterChase(led.Color(0, 0, 127), 50); // Blue

break;

case 6:

rainbow(20);

break;

case 7:

rainbowCycle(20);

break;

case 8:

theaterChaseRainbow(50);

break;

case 9:

demoCnt = 0;

break;

}

//color adjustment mode

if (modeVal == 0){

if (waitState == 0) {

led.clear();

led.show();

for(uint16_t i=0; i<10; i++) {

led.setPixelColor(colorMode1[i], color);

}

led.show();

if (modeSel() != 0){return;}

delay(800);

for(uint16_t i=0; i<2; i++) {

led.setPixelColor(colorMode2[i], 0);

}

led.show();

if (modeSel() != 0){return;}

delay(400);

for(uint16_t i=0; i<2; i++) {

led.setPixelColor(colorMode3[i], 0);

}

led.show();

if (modeSel() != 0){return;}

delay(400);

for(uint16_t i=0; i<2; i++) {

led.setPixelColor(colorMode4[i], 0);

}

led.show();

if (modeSel() != 0){return;}

delay(400);

led.clear();

led.show();

if (modeSel() != 0){return;}

delay(400);

waitState = 1;

}

if (modeSel() != 0){return;}

valVR = analogRead(pinVR);

valVRMap = map(valVR, 0, 512, 0, 255);

if (valVRMap > 255) {

valVRMap = 255;

}

if (valVRMap < 0) {

valVRMap = 0;

}

color = Wheel(valVRMap);

blink(0, 7);

}

//brightness adjustment mode

if (modeVal == 3){

if (waitState == 0) {

led.clear();

led.show();

for(uint16_t i=0; i<15; i++) {

led.setPixelColor(brightMode1[i], color);

}

led.show();

if (modeSel() != 3){return;}

delay(800);

for(uint16_t i=0; i<3; i++) {

led.setPixelColor(brightMode2[i], 0);

}

led.show();

if (modeSel() != 3){return;}

delay(400);

for(uint16_t i=0; i<3; i++) {

led.setPixelColor(brightMode3[i], 0);

}

led.show();

if (modeSel() != 3){return;}

delay(400);

for(uint16_t i=0; i<3; i++) {

led.setPixelColor(brightMode4[i], 0);

}

led.show();

if (modeSel() != 3){return;}

delay(400);

led.clear();

led.show();

if (modeSel() != 3){return;}

delay(400);

waitState = 1;

}

if (modeSel() != 3){return;}

valVR = analogRead(pinVR);

valVRMap = map(valVR, 0, 512, 3, 70);

if (valVRMap > 70) {

valVRMap = 70;

}

if (valVRMap < 0) {

valVRMap = 0;

}

Serial.print(valVR);

Serial.print("\t");

Serial.println(valVRMap);

brightness = valVRMap;

led.setBrightness(brightness);

blink(0, 7);

}

//normal mode

if (modeVal == 1) {

waitState = 0;

sensorValue = analogRead(sensorPin);

eyelidMode = map(sensorValue, 770, 815, 0, 8);

if (eyelidMode > 8) {

eyelidMode = 8;

}

if (eyelidMode < 0) {

eyelidMode = 0;

}

valVR = analogRead(pinVR);

valVRMap = map(valVR, 314, 456, 14, 0);

if (valVRMap > 14) {

valVRMap = 14;

}

if (valVRMap < 0) {

valVRMap = 0;

}

blink(eyelidMode, valVRMap);

}

byte modeSel(){

int i,j=0;

//Get the mode switches state

for (i=0; i<2; i++) {

j = (j << 1) | digitalRead(modePin[i]); // read each input pin

}

return j; //return address

}

void blink(int eyelid, int LR) {

if (eyelid != 8){

//Pewter

for(uint16_t i=0; i<led.numPixels(); i++) {

led.setPixelColor(i, led.Color(66, 66, 66));

}

//Black eye

for(uint16_t i=0; i<blackNum; i++) {

led.setPixelColor(blackLED[LR][i], color);

}

//pupil

for(uint16_t i=0; i<pupilNum; i++) {

led.setPixelColor(pupilLED[LR][i], led.Color(0, 0, 66));

}

//eyelid

for(int i=0; i < eyelidNum[eyelid]; i++) {

led.setPixelColor(eyelidLED[i], 0);

}

} else if (eyelid == 8){

led.clear();

}

led.show();

}

// Fill the dots one after the other with a color

void colorWipe(uint32_t c, uint8_t wait) {

for(uint16_t i=0; i < led.numPixels(); i++) {

led.setPixelColor(i, c);

if (modeSel() != 2){return;}

led.show();

delay(wait);

}

demoCnt++;

}

//Theatre-style crawling lights.

void theaterChase(uint32_t c, uint8_t wait) {

for (int j=0; j<10; j++) { //do 10 cycles of chasing

for (int q=0; q < 3; q++) {

for (int i=0; i < led.numPixels(); i=i+3) {

led.setPixelColor(i+q, c); //turn every third pixel on

if (modeSel() != 2){return;}

}

led.show();

delay(wait);

for (int i=0; i < led.numPixels(); i=i+3) {

led.setPixelColor(i+q, 0); //turn every third pixel off

}

demoCnt++;

}

void rainbow(uint8_t wait) {

uint16_t i, j;

for(j=0; j<256; j++) {

for(i=0; i<led.numPixels(); i++) {

led.setPixelColor(i, Wheel((i+j) & 255));

if (modeSel() != 2){return;}

}

led.show();

delay(wait);

}

demoCnt++;

}

// Slightly different, this makes the rainbow equally distributed throughout

void rainbowCycle(uint8_t wait) {

uint16_t i, j;

for(j=0; j<256*5; j++) { // 5 cycles of all colors on wheel

for(i=0; i< led.numPixels(); i++) {

led.setPixelColor(i, Wheel(((i * 256 / led.numPixels()) + j) & 255));

if (modeSel() != 2){return;}

}

led.show();

delay(wait);

}

demoCnt++;

}

//Theatre-style crawling lights with rainbow effect

void theaterChaseRainbow(uint8_t wait) {

for (int j=0; j < 256; j++) { // cycle all 256 colors in the wheel

for (int q=0; q < 3; q++) {

for (int i=0; i < led.numPixels(); i=i+3) {

led.setPixelColor(i+q, Wheel( (i+j) % 255)); //turn every third pixel on

if (modeSel() != 2){return;}

}

led.show();

delay(wait);

for (int i=0; i < led.numPixels(); i=i+3) {

led.setPixelColor(i+q, 0); //turn every third pixel off

}

demoCnt++;

}

// Input a value 0 to 255 to get a color value.

// The colours are a transition r - g - b - back to r.

uint32_t Wheel(byte WheelPos) {

WheelPos = 255 - WheelPos;

if(WheelPos < 85) {

return led.Color(255 - WheelPos * 3, 0, WheelPos * 3);

}

if(WheelPos < 170) {

WheelPos -= 85;

return led.Color(0, WheelPos * 3, 255 - WheelPos * 3);

}

WheelPos -= 170;

return led.Color(WheelPos * 3, 255 - WheelPos * 3, 0);

}

動作

楽しいハロウィンになりました♪

コメントはこちらからコメントをキャンセル

このサイトはスパムを低減するために Akismet を使っています。コメントデータの処理方法の詳細はこちらをご覧ください。

構成

装置概要

LED目ん玉

動作モード

Arduino IDEコード

動作

関連記事

コメントはこちらから コメントをキャンセル

コメントはこちらからコメントをキャンセル